Mms100 troubleshooting

Mms100 troubleshooting DEFAULT

Screenshots

Description

The Mighty Mule Smart Control App allows you to monitor and control your Mighty Mule Smart Control Door/Gate Openers from the convenience of your mobile device, from anywhere in the world. 

No more worrying about whether your Smart Control is closed. The Mighty Mule Smart Control App notifies you of who operated your Smart Door/Gate and Door light and when, tracking Control door/gate activity history for your security. 

The Mighty Mule Smart Control Door/Gate App controls:

- Up to 10 users per Door/Gate.
- User access to specific time periods.
- Unlimited # of Control Doors/Gates per place.
- Up to 10 places.
- Automatic Door opening and closure based on path towards/away from Control Door through geofencing. Requires purchase and installation of an Mighty Mule Smart Control Door/Gate Openers. 

To learn more about Mighty Mule Smart Control Openers and find an Mighty Mule Smart Control Door/Gate dealer, visit mightymule.com.

Version 1.82.1

- Overall pairing improvements - added clear instruction for better pairing process, removed return to app notification from pairing process.
- Updated deprecated APIs for WebView
- Updated deprecated APIs for Wi-Fi in iOS 14
- Bug fixes

Ratings and Reviews

See other comments

Seem to be having similar story to other reviews on here. It worked great for a bit and then started having issues. At time the app won’t open, just stuck with the logging in and spinning circle. Then it became after it did take forever to log in picking the commands did nothing even from inside the garage, on the house WiFi, right under the motor.

Was driving my wife to work at 0330 after being unable to use the appt to open it and driving down the toad 15 minutes from the house an alert comes up saying the door was just opened. Check our house cameras and sure enough door is wide open after with us away from home.

The biggest complaint however is as soon as you set up the Appt any remotes you have programmed are immediately disabled. So sitting in the car, in the garage, with a remote that used to control the door and it won’t open solely because of the app.

We apologize for the inconvenience. We have fixed the issue and putting the measure in place to avoid such occurring in the future.

Started off good like everyone else’s reviews

Started off good but then the servers issue like everyone else’s complaints started. Now it constantly blinks which the instructions say is an issue with MM servers....doesn’t keep a history of events, geo fencing features don’t work and functionality of the app is spotty at best. Called tech support and from the conversation it sounded like it was his first day. No answers to any of my questions and no idea how to fix what I was calling about. Concept is great but execution leaves a lot to be desired. As I type I’m watching the light blink green on the receiver. So far. Waste of money.

Updated review: Still no change. In fact things have gotten worse. It currently says that “Radio has been disconnected” due to an obstruction and to operate the gate manually. Well. There is NO obstruction and after powering the unit off and back on it still doesn’t work even after cycling the gate several times with the fob and Gate keypad.

After ALL OF THESE BAD REVIEWS I have seen no improvement in the app UI or overall response. If you’re not going to fix it please tell people so they can move on. If the mission here was to take people’s money and then abandon follow up support, you’ve accomplished that 100%. I would be one thing if there were just as many glowing reviews as there were bad but this doesn’t seem to be the case here at all. A little customer service would be nice MM. does that still exist?

Worst App Ever

Let me start by saying what an utter piece of absolute garbage this app is. I’ve had the Mighty Mule garage door opener for over a year and my main reason for purchasing were the “smart home” features. In reality, I’ve had to reset the wifi connection every couple of weeks for over a year, which gives me anxiety about one day not being able to get into the house if I go for a walk and only bring my phone (garage opener does not come with a keypad).

Resetting has been just about the only consistent thing this app has provided me with. Luckily, now they fixed that issue... by not even letting me log in. Just get the error about servers not responding. This has lasted for days now.

So, if by chance, you’re reading because you also want “smart” features in your garage door opener, just buy the Chamberlain universal adapter. I had that in my old house and never had any problems. The Mighty Mule opener itself is fine, but if this is what’s supposed to set it apart from the competition, they have a long way to go. Worst app ever!!!!!

The developer, GTO Access Systems, LLC, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.

Data Not Collected

The developer does not collect any data from this app.

Privacy practices may vary, for example, based on the features you use or your age. Learn More

Information

Seller
GTO Access Systems, LLC

Size
74.5 MB

Category
Lifestyle

Compatibility
iPhone
Requires iOS 10.0 or later.
iPad
Requires iPadOS 10.0 or later.
iPod touch
Requires iOS 10.0 or later.
Mac
Requires macOS 11.0 or later and a Mac with Apple M1 chip.

Age Rating
4+

Location
This app may use your location even when it isn’t open, which can decrease battery life.

Copyright
© 2017

Price
Free

Supports

  • Family Sharing

    With Family Sharing set up, up to six family members can use this app.

More By This Developer

You Might Also Like

Sours: https://apps.apple.com/us/app/mighty-mule-smart-control-app/id1222168620

Copyright

©

2019 Nortek Security and Control, LLC.10022116 A

Mighty Mule

®

is the retail brand of Nortek Security and Control, LLC.

This product meets the requirements of UL325, the standard for gate operator safety.

Installation Manual

(For a single or dual gate installation)

Horizontal Support

Gate Swings Evenly and Freely

Hung Firmly and Plumb

Post Bracket

Control Box

Fence Post Set in ConcreteFence Post Set in Concrete

Run 1000' (max.) of low voltage

wire to control box from

transformer (wire not included).

Power Cable

PVC conduit (not included)

to protect wire from lawn

mowers and weed eaters.

PVC conduit (not included)

to run second opener power

cable under driveway.

Gate Bracket

Warning Sign

Secondary Opener

Primary Gate Opener

Horizontal Support

Post Bracket

Gate Bracket

Warning Sign

120 Volt indoor

Transformer

(surge protector

not supplied)

Example of Dual Gate nished installation

(Installations vary slightly on different types of gates)

MM571W

MM572W

PRINTER’S INSTRUCTIONS:

INSTR,INSTL,MM571W & MM572W - P/N: 10022116 A - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - TOLERANCE: ± .125” - FOLDING: ALBUM FOLD - BINDING: SADDLE STITCH - SCALE: 1-1

Single gate installation [MM571W]

Dual gate installation MM572W]

Sours: https://www.manualshelf.com/manual/mighty-mule/smt571w-acp/instructions-assembly-english.html
  1. Flagpoles etc reviews
  2. Town of hempstead
  3. Mars curiosity rover
  4. Cider synonym
SymptomDiagnosisCheck:1 short beep upon activationBlown Fuse
Low or Bad Battery
Loose Battery Connection
• Fuse
• Battery Under Load
• Battery Harness Connections
1 short beep upon power upCircuit Board Powered Up & Ready• Normal OperationContinuous Uninterrupted AlarmCircuit Board Senses an Obstruction• Path of Gate
• Gate for Level and Plumb
• Stall Force Adjustment
• Disconnect Safety Devices
• Rev Counter
1 beep with 10 seconds offLow Batter)' Condition• Fuses
• Battery Harness Connections
• Battery Under Load
1 beep then 2 beepsMaster Motor Terminals Shorted• Connections to Master Inputs
• Master Arm Power Cable
• Motor
• Circuit Board
1 beep then 3 beepsSlave Motor Terminals Shorted1 beep with 2 seconds offMaster Arm Limit Switch Error• Connections to Master Inputs
• Master Arm Power Cable
• Master Input ORG & GRN. BRN & GRN voltage with wires disconnected. 11VDC across each terminal.
2 beeps with 2 seconds offSlave Arm Limit Switch Error3 beeps with 2 seconds offMaster Arm Rev Counter Error• Connections to Master Inputs
• Master Arm Power Cable
• Rev Counter
4 beeps with 2 seconds offSlave Arm Rev Counter ErrorStatus (clear) 1 blinkCycle Terminal ShortedDisconnect the push button, keypad, intercom keypad, or any other accessory wired to this terminal. Try the remote. If the remote works, then the problem is the accessory.Status (clear) 2 blinksSafety Terminal ShortedDisconnect the loop detector, photo beam, or any other accessory wired to this terminal. Try the remote. If the remote works, the problem is the accessory.Status (clear) 3 blinksExit Terminal ShortedStatus (clear) 4 blinksShadow Terminal ShortedStatus (clear) 5 blinksClose Edge Terminal ShortedDisconnect the edge sensor, photo beam, or any other accessory wired to this terminal. Try the remote. If the remote works, the problem is the accessory.Status (clear) 6 blinkOpen Edge Terminal ShortedRF (yellow) FlickersReceiving 318 MHz RFNormal operation when remote or wireless keypad is used.RF (yellow) OFFNo 318 MHz RF Received• Battery in Remote
• Program Remote
• Antenna Receiver Connections
• Antenna Receiver
Power (green) ONAC or Solar Power PresentNormal OperationPower (green) OFFNo AC or Solar PowerTransformer:
• Breaker or GFI
• Power at AC outlet.
• Output of Transformer.
• Voltage on wire at 18 VAC Input
Solar:
• Solar Panel Wires Reversed
• Weather
• Solar Panel Placement
• Output of Solar Panel
• Voltage on wire at Solar Input
Charge (red) ONFast Charging ModeBattery Voltage should be -14.8 VDC when connected to the circuit boardCharge (red) Fast BlinkingSoak Charging ModeBattery Voltage should be -14.1 VDC when connected to the circuit boardCharge (red) Slow BlinkingFloat ChargeBattery Voltage should be -13.8 VDC when connected to the circuit boardCharge (red) OFFBattery Not Being Charged• AC power
• Transformer
• Solar Panel
• Charging Circuit
Sours: https://helpgaragedoor.com/mighty-mule-gate-opener-troubleshooting/
Mighty Mule Smart Gate Opener iOS Pairing (Mighty Mule Smart Control App 1.76.1)

Enables control and monitoring of your Mighty Mule Smart Gate Opener from anywhere. Check the status of your gate, open or close it using the MMS100 and the Mighty Mule Smartphone app. Can be used on gates installed up to 1/2 mile from your home.

  • Required accessory to control and monitor your gate from anywhere using your smart device
  • The Mighty Mule App can be used for controlling and monitoring both your Mighty Mule automatic gate operator as well as your Mighty Mule garage door operator to provide a complete perimeter access solution.
  • Mighty Mule App available at the Apple App Store® or Google Play Store™.
  • Compatible with select Mighty Mule Gate Operators: 371W, 372W, 571W, 572W, TS571W
  • Easy to install: plug in, connect with your home router and gate control box to get started.
  • Backed by a 12 month Mighty Mule Warranty and Technical Support.

Kit Contents
Includes (1) MMS 100 Wireless Connectivity System with radio module and antenna, (1) Power adapter cord.

WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Sours: https://www.mightymule.com/mms100/

Troubleshooting mms100

Mighty Mule Smart Control App

The Mighty Mule Smart Control App allows you to monitor and control your Mighty Mule Smart Control Door/Gate Openers from the convenience of your mobile device, from anywhere in the world.

No more worrying about whether your Smart Control is closed. The Mighty Mule Smart Control App notifies you of who operated your Smart Door/Gate and Door light and when, tracking Control door/gate activity history for your security.

The Mighty Mule Smart Control Door/Gate App controls:

- Up to 10 users per Door/Gate.
- User access to specific time periods.
- Unlimited # of Control Doors/Gates per place.
- Up to 10 places.
- Automatic Door opening and closure based on the path towards/away from Control Door through geofencing. Requires purchase and installation of Mighty Mule Smart Control Door/Gate Openers.

To learn more about Mighty Mule Smart Control Openers and find Mighty Mule Smart Control Door/Gate dealer, visit mightymule.com.

Sours: https://play.google.com/
Completion of Mighty Mule MM371W gate with FM 143 auto lock install

The Mighty Mule Gate Operator also has an adjustable auto-close feature. Compare. Page 2 Warning! Free shipping . Where can I purchase Mighty Mule products? Gate … Monthly, turn off the power switch and disconnect the Mighty Mule and move the gate to make sure the gate is moving freely without sticking or binding. Page 14: Check Direction Of Gate Swing 2. A remote control placed in your car sends a signal to the opener as you approach the gate, activating the motor and allowing you access. Free delivery. Below you will find the Mighty Mule gate opener troubleshooting tips for the models that belong to the 50, 500, UL325, and FM402 series. Check Direction of Gate Swing The Mighty Mule Gate Opener is designed for PULL-TO-OPEN installations. This equipment is similar to other gate or door and/or user agree to assume responsibility for all equipment and meets or exceeds Underwriters liability and use of this … the Mighty Mule Sales Department (800-543-4283). Find a Retailer. See the seller's listing for full details and description. Mighty Mule and GTO Technical Support for your Mighty Mule or GTO automatic gate opener and access controls. Shuffle Mode Shuffle the order of songs in a playlist T Do not run more than 1000 ft. of wire. 1. See all condition definitions- opens in a new window or tab. Open Collector Output: Used to connect Keypad to gate opener that accepts logic inputs (All GTO gate openers) in hard-wired applications. Smart Gate Door Opener Antenna for GTO Mighty Mule MM571W MM572W MM371W MMS100. Set your store to see local availability Add to Cart. $39.99. We have been working hard on this one for the past 4 months to give you new features that will enhance, improve, and expand the capabilities of your current Mighty. • All low voltage wire used with the Mighty Mule Gate Opener must be 16 gauge, dual conductor, stranded, direct burial wire. The Mighty Mule Gate Operator features Dual Sense Technology™. All codes are deleted. The item may be a factory second. RESET + – – – + + RESET Button: Pressing this button for 2 seconds will reprogram keypad to factory settings. $29.99. Page 45: Troubleshooting Guide - … Smart Gate Door Opener Antenna for GTO Mighty Mule MM571W MM572W MM371W MMS100. Lubricate the hinges or repair the gate as required before reattaching the Mighty Mule. Mighty Mule Wireless Connectivity Kit Model# MMS100 $ 108 50 $ 108 50. For new users, Buy Mighty here. This feature makes the gate stop and reverse direction when it comes in contact with an obstruction. Mighty Mule gate opener troubleshooting Although products made by this brand are generally reliable, more or less serious issues may occur every now and then. Mighty Mule gate openers provide a convenient and effortless method of opening your property's main gate as you approach in your vehicle. Default master code is 1234. Mighty is proud to announce the release of software version 1.0. Use the retail search tool to find genuine Mighty Mule products online or in store.
Mother Sells 6 Year-old Twins For $500 Found In Brazil, Polsky Tv Firestick, Cannon Gun Safe Touch Up Paint, Databricks Rest Api Endpoint, 1935 Chevy 5 Window Coupe, Fortnite Dpi Calculator, Kobalt 40v Snow Shovel, Hearts Of Iron 4 The Great War Mod Wiki, Sad Dad Song, Dr Seuss Interactive Read Alouds,

Sours: http://pms.51select.com/020wkd/09dfc8-mighty-mule-mms100-factory-reset

You will also like:

MANUAL, INSTRUCTIONS, MMS100 - P/N: 10023523 A - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.5X11", TOL. +/- 0.125, SCALE: 1:1, FRONT & BACK, FOLD TO FIT BOX

Wireless Connectivity System

NOTE: Your Mighty Mule gate operator should be installed prior to setting up the MMS100 Wireless Connectivity System.

AT THE GATE - INSTALLING THE RADIO MODULE

Prior to any assembly of the MMS100, ensure that the Mighty Mule gate operator is turned OFF and disconnected from its power source.

If required, punch out the access hole for the Auxiliary Antenna.

Align the connectors, then plug in the small radio module into the operator control board.

Guide the radio module antenna cable through the Auxiliary Antenna hold, then twist and tighten the antenna pointing upward.

Auxiliary

Antenna

Access

(Punch Out)

WiFi ROUTER - Setting Up and Provisioning The Bridge

1.

Install/locate the bridge near your wireless router.

2.

Connect the Antenna and plug in the Bridge.

3.

Plug in the MMS100 (only one gate operator can be connected to your Bridge).

4.

To pair/connect the MMS100 to your WiFi:

a) Download the Mighty Mule App from the Apple App Store or Google Play Store.

b) Create a Mighty Mule account, then sign in.

c) Select Add Device on the home screen.

d) Select Gate from the pop-up menu, then follow the instructions in the App (or refer to the quick start guide for your specific model at

www.mightymule.com).

MMS100 Installation Instructions

PRINTER'S INSTRUCTIONS

Installation Manual

Displayed Mighty Mule App images are Apple iOS. The Android app interface will be slightly different.

MMS100

PAIR

RESET

Sours: https://www.manualslib.com/manual/1674056/Mighty-Mule-Mms100.html


508 509 510 511 512